Motic

Well plate holder for the Motic PX43 Bio inverted microscopes. Measures 132mm x 86mm.NOTE: This item is not returnable.

Auxiliary stage (paired) for the PX43 Bio inverted microscope. These stage extensions fit on either side of the existing stage and thus are used to increase the area of the working surface. Motic...

Motic phase stops are for use with the Motic PX43 Phase Slider and a phase centering telescope. Select from the following phase stop options when ordering: Phase Stop 0.3 Ph0 (for 4x...

This phase slider is for the Motic PX43 Bio inverted microscope. The slider has phase contrast slots to be used with a phase stop and a BF slot. The slots are centerable. Centering telescope can be...

The Motic Plan UC Fluor phase contrast LWD 40x microscope objective (Ph 1) is designed to be used with the inverted PX43 biological microscope. NA = 0.65 WD = 1.3mm Thread size = 4/5" x 1/36" (RMS...

The Motic Plan UC Fluor phase contrast LWD 20x microscope objective (Ph 1) is designed to be used with the inverted PX43 biological microscope. NA = 0.45 WD = 5.0mm Thread size = 4/5" x 1/36" (RMS...

The Motic Plan UC Fluor phase contrast LWD 10x microscope objective (Ph 1) is designed to be used with the inverted PX43 biological microscope. NA = 0.3 WD = 11.2mm Thread size = 4/5" x 1/36" (RMS...

The Motic Plan UC Fluor 60x microscope objective is designed to be used with the inverted PX43 biological microscope. NA = 0.75 WD = 1.0mm Thread size = 4/5" x 1/36" (RMS standard) DIN = 45mm Motic...

The Motic Plan UC Fluor 40x microscope objective is designed to be used with the inverted PX43 biological microscope. NA = 0.65 WD = 1.3mm Thread size = 4/5" x 1/36" (RMS standard) DIN = 45mm Motic...

The Motic Plan UC Fluor 20x microscope objective is designed to be used with the inverted PX43 biological microscope. NA = 0.45 WD = 5.0mm Thread size = 4/5" x 1/36" (RMS standard) DIN = 45mm Motic...

The Motic Plan UC Fluor 10x microscope objective is designed to be used with the inverted PX43 biological microscope. NA = 0.3 WD = 11.2mm Thread size = 4/5" x 1/36" (RMS standard) DIN = 45mm Motic...